| 摘要: |
| 研究了数控加工中圆环面刀具路径规划,建立圆环面刀具数学模型,从刀位点计算、曲面边界离散、相邻刀轨计算等方面确定刀具路径规划算法.最后,利用Matlab工具编程对路径规划算法进行了具体实现,通过计算基于圆环面刀具的刀位点数据,拟合生成刀具轨迹,同时利用UG软件采用球头刀对相同曲面进行加工路径仿真,通过两者比较,可以得出圆环面刀具加工效率更高的结论. |
| 关键词: 圆环面刀具 数控加工 刀具路径规划 |
| DOI： |
| 分类号: |
| 基金项目: |
|
| Tool path in torus tool CNC machining |
|
XU Ying, LI Ruqiong
|
|
College of Information,Mechanical and Electrical Engineering,Shanghai Normal University
|
| Abstract: |
| This paper is about tool path in torus tool CNC machining.The mathematical model of torus tool is established.The tool path planning algorithm is determined through calculation of the cutter location,boundary discretization,calculation of adjacent tool path and so on,according to the conversion formula,the cutter contact point will be converted to the cutter location point and then these points fit a toolpath.Lastly,the path planning algorithm is implemented by using Matlab programming.The cutter location points for torus tool are calculated by Matlab,and then fit these points to a toolpath.While using UG software,another tool path of free surface is simulated of the same data.It is drew compared the two tool paths that using torus tool is more efficient. |
| Key words: torus tool CNC machining tool path planning |
Editorial Board