| 摘要: |
| 理想的模数转换在直角坐标轴上应是一条过零点的直线.在实际工程中,由于信号处理电路及芯片性能等因素,对转换的精度产生了影响.因此需要采用线性拟合的方法加以修正，从而提高转换精度.提出一种基于以太网的模数转换全自动修正方法,采用软硬件配合的方式,只需轻点鼠标,即可自动完成所有模数转换通道的线性修正,并且计算出误差、信噪比和有效位数等指标,同时将线性修正系数存入模数转换卡板载的EEPROM中,与传统方法相比.此方法更方便、准确和高效,具有广泛的应用前景. |
| 关键词: 以太网 模数转换 线性拟合 全自动修正 EEPROM |
| DOI： |
| 分类号: |
| 基金项目:上海师范大学校级项目(SK201128) |
|
| Auto correct method of AD converters precision based on ethernet |
|
NI Jifeng1, ZHANG Cheng2
|
|
1.College of Information,Mechanical and Electrical Engineering,Shanghai Normal University;2.Shanghai Aerospace Control Technology Institute
|
| Abstract: |
| Ideal AD conversion should be a straight zero-crossing line in the Cartesian coordinate axis system. While in practical engineering, the signal processing circuit, chip performance and other factors have an impact on the accuracy of conversion. Therefore a linear fitting method is adopted to improve the conversion accuracy. An automatic modification of AD conversion based on Ethernet is presented by using software and hardware. Just by tapping the mouse, all the AD converter channel linearity correction can be automatically completed, and the error, SNR and ENOB (effective number of bits) are calculated. Then the coefficients of linear modification are loaded into the onboard AD converter card's EEPROM. Compared with traditional methods, this method is more convenient, accurate and efficient，and has a broad application prospects. |
| Key words: Ethernet AD converters linear fit automatic correction EEPROM |
Editorial Board